ADBL – Green’Gine

Description

ADBL Green’Gine is a concentrated, strong cleaning fluid for the engine compartment and other heavily soiled surfaces. Contains a mixture of safe, rapidly evaporating solvents with high-quality surfactants. In addition, additional inhibitors protect against corrosion. The product penetrates and separates greasy dirt from the surface and facilitates rinsing. After contact with dirt, it chemically binds it so that rinsing the surface becomes extremely easy. Contains corrosion inhibitors.

Instructions for use:

Apply a cleaning solution (1:1 to 1:10 for the engine compartment, 1:4 to 1:20 for painted surfaces) depending on the degree of contamination. Spray the solution onto the surface to be cleaned and allow the product to work for 30-180 seconds, depending on the degree of soiling (never let it dry out!). If necessary, work with a brush or sponge and then rinse with plenty of clean water. If necessary, If necessary, repeat the steps.

Our advice:
The surface to be cleaned should not be too hot, and test the product in an inconspicuous place before use. Be sure to test the surface in an inconspicuous area. The cleaned surface must be fresh. Do not allow to dry on the surface.

Contents: 500ml, 1000ml, 5000ml.

Warnings

• H290 – May be corrosive to metals.
• H314 – Causes severe skin burns and serious eye damage.

Safety

• P101: If medical advice is required, keep the packaging or label available.
• P102: Keep out of the reach of children.
• P264: Wash hands thoroughly after use.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P330+P331: IF SWALLOWED: RINSE MOUTH DO NOT INDUCE VOMITING.
• P304+P340: IF INHALED: Move the person to fresh air and ensure unrestricted breathing.
• P305+P351+P338: IF IN EYE CONTACT: Gently rinse with water for several minutes Remove contact lenses if possible.
• P501: The contents/container should be disposed of through the selective disposal system at the place of residence.