Description
INTENSE CANDY APPLE SHINE AND SMOOTH FEEL!
DIAMOND BODY 36 is an easy-to-apply protective coating that lasts up to 36 months, offering an ultra-smooth feel, amazing shine and long-lasting hydrophobicity, repelling oil, liquid and dirt for up to three years. Your car stays clean longer, is easier to clean, and always looks good. In addition, it offers many features of professional vehicle coatings, but does not require professional training. With proper preparation and maintenance, DIAMOND BODY 36 will produce up to 3 years of hydrophobic protection while your car displays an intense candy apple shine.
Recommended:
Diamond Body Prep for best application and full strength.
APPLICATION INSTRUCTIONS
- Apply at temperatures between 10-30°C/50-90°F.
- Apply in a closed, well-ventilated indoor area with air humidity not exceeding 70%.
- Wear protective gloves.
- Use fresh, clean applicators used only for nanotechnology treatment and microfiber towels for applying additional layers (do not use previously used towels).
WHAT YOU WILL NEED
- 1 microfiber towel.
- 1 pad/applicator.
- Protective gloves.
- Treatment product and Diamond Body Prep for better shine.
APPLICATION TIPS
- If applying in high heat or humidity, reduce the time between application and removal.
- Test on a small area to determine the appropriate time to let the coating bond to the surface.
- Apply to bodywork, headlights, rubber and metal trim.
- As the coating bonds to the surface, a haze will appear. This indicates that the coating is ready to be removed.
- If the product dries on the surface is difficult to remove, re-wet the area with more product and polish immediately.
- If a second coat is desired, let it harden for 1 hour before application.
INSTRUCTIONS
- Wash, polish and treat the bodywork with Diamond Body Prep.
- Shake the DIAMOND BODY 36 bottle thoroughly for 15 seconds.
- Put 15 drops on an applicator.
- Apply to 1-2 sections of the car in crosshatch mode.
- Wait 5-10 minutes to watch a haze appear, then gently buff the treated areas and polish off the excess with a low-nap microfiber towel.
- If a second coat is desired, leave for 1 hour before applying a second coat again.
- Allow it to stand for 1 hour before using the vehicle.
Data:
- Contents: 30 ml.
- Protection: Hydrophobic protection for up to 3 years.
- Swiss Made.
- Apply to bodywork, headlights, rubber and metal trim.
- Scratch resistance.
